STATE LICENSED “SINCE 1982” | CSLB C-39 #432352 | FULL WORKERS COMP. & $2M LIABILITY INSURANCE | OUR EMPLOYEE ROOFERS ARE FACTORY CERTIFIED
Serving Most of Southern California
Mon – Sat 7:00AM – 6:00PM Appointments Available
6831 Suva St. Bell Gardens, CA 90201
EMERGENCY REPAIRS 24/7 Fast Emergency Service 562-928-1200
+15629281200 andre@zdigital.com

Royal Roofing Company

Commercial Roofing Contractor in Burbank, CA

Roofs That Protect Your Business Without the Drama

When your commercial roof fails, everything stops. We handle flat roof systems, TPO and PVC roofing, and Title 24 compliance so you can focus on running your business.
Get a Free Quote
Call: 562-928-1200
Aerial view of a residential roof undergoing commercial roofing repairs in Acton, California.
Roof framing under construction in Acton, CA for a commercial building.

Commercial Roof Maintenance in Burbank

What You Get When Your Roof Actually Works

You’re not dealing with emergency leaks during business hours. Your insurance premiums stay reasonable because your roof passes inspections. Your HVAC costs drop because Title 24 cool roof restoration actually reflects heat instead of absorbing it.

That’s what happens when a commercial roofing contractor shows up with the right crew, the right materials, and four decades of knowing exactly what fails first on flat roof systems in Southern California. You’re not paying for another patch job that buys you six months. You’re getting industrial roofing solutions that last because someone finally did the drainage right, sealed the seams correctly, and didn’t cut corners on the membrane.

The building stays dry. Your tenants stop complaining. You’re not scrambling to find emergency roof leak repair services every time it rains in Burbank, CA. That’s the difference between a roof that works and one that just exists until the next problem.

Burbank Commercial Roofing Experts Since 1980

We've Been Fixing Burbank Roofs Since 1980

We’ve been handling commercial properties in Los Angeles County for over 40 years. We’re GAF Master Elite certified, which puts us in the top 2% nationally. That’s not marketing talk—that’s a factory certification you can verify.

Our crews are in-house. No subcontractors showing up who’ve never seen your building before. Same project managers, same foremen, same people who know that Burbank’s spring rains and summer heat destroy roofs differently than they do in other parts of California.

We carry $2 million in liability coverage and we’re licensed under C-39 #432352. Eighty-six percent of our work comes from repeat clients and referrals, which tells you more than any sales pitch could. When property managers in Burbank, CA need a commercial roofing contractor they can count on, they call us because we’ve already proven it on their other buildings.

Professional roofing contractor applying roofing membrane on commercial roof in Acton, CA.

Our Commercial Roof Installation Process

Here's Exactly How We Handle Your Roof

We start with an actual inspection—not a sales call disguised as one. We’re looking at your drainage, your seams, your flashing, and whether your current system can be restored or needs replacement. If you’re dealing with Title 24 compliance issues, we’ll tell you exactly what’s required and what your options are for cool roof coatings versus full replacement.

Once you approve the scope, we schedule around your business operations. Most commercial roof maintenance and installation happens during off-hours or in phases so you’re not shutting down. Our crews show up with the materials already staged—TPO and PVC roofing systems, modified bitumen, whatever your building needs based on the existing structure and your budget.

During installation, we’re documenting everything with photos. That matters for your insurance, for your records, and for proving the work was done right if you ever need warranty coverage. When we’re done, you get a walkthrough that explains what we did, what to watch for, and what your maintenance schedule should look like. No surprises, no hidden issues that show up three months later. You know exactly what you paid for and what you’re getting.

Roofing membrane installation for commercial building in Acton, CA.
Get a Free Quote
Call: 562-928-1200

Explore More Services

See All Services

About Royal Roofing Company

Learn About Us

Flat Roof Systems and Industrial Solutions

What's Actually Included in Commercial Roofing

We handle every type of commercial roof system you’ll find in Burbank, CA—hot tar cap sheet, modified bitumen, single-ply membranes like TPO and PVC roofing, and EPDM systems. If your building needs Title 24 cool roof restoration to meet California energy codes, we’re certified to install Energy Star-qualified systems and CRRC-rated coatings that actually pass inspection.

Commercial roof maintenance isn’t just patching leaks. It’s clearing your drains before ponding water destroys the membrane. It’s resealing penetrations before they become interior leaks. It’s catching small problems during scheduled inspections instead of emergency calls when your ceiling is dripping. We offer maintenance programs that keep your roof under warranty and extend its lifespan without the constant repair bills.

For industrial roofing solutions, we’re equipped to handle large-scale projects—warehouses, distribution centers, multi-building complexes. Our crews can manage phased installations that keep your operations running while we’re replacing sections of roof. And if you’re dealing with an emergency, we respond fast with tarps, temporary seals, and whatever it takes to protect your property until we can make permanent repairs. You’re not waiting three days while water pours into your building.

New commercial roofing installation on modern buildings in Acton, CA.

How long does a commercial roof replacement take in Burbank?

It depends entirely on your building size, roof type, and whether we’re working around your business hours. A small commercial building with a straightforward flat roof system might take three to five days. A larger industrial facility or multi-building complex could take several weeks, especially if we’re phasing the work to avoid shutting you down.

Weather plays a role too. We’re not installing TPO and PVC roofing in the rain, and we’re not applying coatings when temperatures drop too low for proper curing. In Burbank, CA, that’s rarely an issue, but spring rains can delay schedules if we’re in the middle of a tear-off.

The timeline also changes if we find structural damage once we remove the old roof. If your decking is rotted or your insulation is soaked, we’re fixing that before we install anything new. Skipping those repairs just means you’ll have problems again in a year or two. We’ll give you an honest timeline upfront and update you if anything changes once we’re into the project.

Both are single-ply membrane systems that work well on flat roof systems, but they’re not interchangeable. TPO is less expensive and performs well in most commercial applications. It’s heat-welded at the seams, reflects UV rays, and meets Title 24 cool roof requirements. It’s a solid choice if your roof doesn’t have a lot of grease exposure or chemical contact.

PVC costs more, but it handles chemicals, grease, and ponding water better than TPO. If you’re running a restaurant with rooftop exhaust or an industrial facility with chemical exposure, PVC is the smarter long-term investment. It’s also more flexible in cold weather, though that’s less of a concern in Burbank, CA than it would be in other climates.

Both systems last 20 to 30 years if they’re installed correctly and maintained. The key is proper seam welding and making sure your drainage is right so water isn’t sitting on the membrane. A cheaper material installed poorly will fail faster than a premium system done right. We’ll walk you through which option makes sense for your building based on what’s actually happening on your roof, not just what’s cheapest.

If you’re doing a roof replacement or recovering more than 50% of your existing roof, California’s Title 24 energy code requires cool roof compliance for most commercial buildings. That means your new roof needs to meet specific solar reflectance and thermal emittance standards. It’s not optional—it’s code.

The good news is that cool roof coatings and reflective membranes actually save you money on cooling costs. In Burbank, CA, where you’re running AC most of the year, a roof that reflects heat instead of absorbing it can cut your energy bills by 10% to 30%. That adds up fast on a commercial building.

We install Energy Star-qualified roofing systems and CRRC-certified coatings that meet Title 24 requirements. During your inspection, we’ll tell you whether your project triggers the cool roof mandate and what your options are. Some buildings are exempt, but most commercial properties in California need to comply. Ignoring it means you’ll fail inspection and have to redo the work, which costs a lot more than just doing it right the first time.

Twice a year minimum—once before winter rains and once after. That’s when we’re clearing drains, checking seams, inspecting flashing, and catching small issues before they turn into leaks. If your building has a lot of rooftop equipment, heavy foot traffic, or nearby trees dropping debris, you might need quarterly inspections.

Most commercial roof warranties require documented maintenance to stay valid. If you skip inspections and file a claim three years later, the manufacturer can deny coverage because you didn’t hold up your end. Regular maintenance isn’t just about preventing leaks—it’s about protecting your investment and keeping your warranty intact.

We offer maintenance programs that put you on a schedule so you’re not trying to remember when the last inspection happened. Our crews document everything with photos and reports, so you have records for insurance, for warranty claims, and for your own property files. It’s a lot cheaper to pay for two inspections a year than it is to replace a roof early because small problems went unnoticed until they caused major damage.

Call us immediately and do whatever you can to protect your interior—move equipment, put down tarps, contain the water. Don’t wait to see if it stops on its own. A small leak turns into structural damage, mold, and electrical hazards fast, especially if water is pooling inside your ceiling.

We offer emergency roof leak repair services and we respond quickly. Our crews arrive with tarps, temporary sealants, and the tools to stop the immediate problem. Once the building is secure, we’ll assess what caused the leak and whether you need a permanent repair, a section replacement, or if this is a sign that your whole roof is failing.

If you’re filing an insurance claim, we document everything with photos and detailed reports. We’ve handled plenty of insurance-driven roofing projects in Burbank, CA, and we know what adjusters need to see. The key is acting fast—the longer water sits, the more damage it causes, and the more expensive the fix becomes. Don’t wait until your ceiling collapses or your tenants are calling code enforcement.

There’s no honest way to give you a number without seeing your roof. A small building with easy access and a straightforward flat roof system costs a lot less than a multi-story complex with equipment everywhere and limited staging space. Material choice matters too—modified bitumen is cheaper than PVC roofing, but PVC lasts longer in certain conditions.

On average, commercial roof replacement in Burbank, CA runs anywhere from $4 to $12 per square foot depending on the system, the complexity, and whether we’re dealing with structural repairs once we remove the old roof. Title 24 cool roof restoration requirements can add to the cost if you need specific coatings or reflective membranes, but those same upgrades save you money on energy bills long-term.

We offer free inspections and straightforward estimates. You’ll know exactly what you’re paying for, what’s included, and what your options are if you want to upgrade materials or add a maintenance plan. We also offer financing with low monthly payments and no-interest options if that makes the project more manageable. The worst thing you can do is wait until your roof fails completely—emergency replacements always cost more than planned ones.

Local Resources

Burbank, CA is located in Los Angeles County in California State

Useful Links

Other Services we provide in Burbank

AAGLA
AAOC
AAROE
AASOCAL
Alliance
AOA
2025 Pulse Award
2026 Pulse Award
BBB
Claim Pages
RA